Conn 88HCL Christian Lindberg Trombones

Conn 88HCL Christian Lindberg Trombones
CL2000 Rotor System

The Conn 88HCL trombone is known worldwide as one the most historic and highest regarded symphonic trombone on the market. Featuring a wide array of bell, rotor, wrap & slide options, the Conn 88HCL is one of the most favored professional symphonic trombones around with excellent projection, response & tonal color.

CL2000 Rotor System
The crux of the Conn 88HCL is the CL2000 Rotor System that was designed in collaboration with artist Christian Lindberg. Rather than using the conical design of other makers, the CL2000 enlarges the concept of a traditional rotor to decrease the resistance on the Bb side of the horn. This rotor system also activates with a much shorter throw than traditional or axial rotor systems. This shorter travel does not allow for the same air compression buildup of other rotors thus eliminating the “pop” or “flop” found with other rotors. CL2000 – “No Pop, No Flop!”

“Conn 88HCL Trombones are completely inspected in our ProShop to guarantee their quality. Any horn that does not meet our standards is sent back to Conn.”
Dave Kessler

Additional Information

• 88HCL Models
• Made in USA
• Slide Options
• Other 88H Wraps

Conn 88HCL Open Wrap Trombones
All Conn 88HCL Series trombones are configured with a .547″ slide bore and a .562″ f-section bore by default.

• Model 88HCL – CL2000 Rotor, Open Wrap | 8 1/2″ Rose Brass Bell
• Model 88HTCL – CL2000 Rotor, Open Wrap | 8 1/2″ Thin Gauge Rose Brass Bell
• Model 88HYCL – CL2000 Rotor, Open Wrap | 8 1/2″ Yellow Brass Bell
• Model 88HKCL – CL2000 Rotor, Open Wrap | 9″ Rose Brass Bell
• Model 88HSCL – CL2000 Rotor, Open Wrap | 8 1/2″ Solid Silver Bell
• Model 88HSGXCL – CL2000 Rotor, Open Wrap | 8 1/2″ Solid Silver Bell, Silver Plated with Gold Trim

Made in the USA
Conn 88HCL Trombones are made in the USA at the Eastlake, Ohio brass factory of Conn-Selmer.

Slide Options for Conn 88HCL Trombones
The Conn 88HCL series trombones are by default setup with a .547″ bore slide with a fixed leadpipe/venturi. However, the Conn 88HCL can be ordered with one of 5 alternate slide options, all of which include 3 removable leadpipes. Slide upgrade options are:

• SL2525 – .525″ bore on both tubes – 2 small shank & 1 large shank pipes
• SL2547 – .525″ top tube, .547″ bottom tube – 2 small shank & 1 large shank pipes
• SL4747 – .547″ bore on both tubes – 3 large shank pipes
• SL4762 – .547″ top tube, .562″ bottom tube – 3 large shank pipes
• SL6262 – .562″ bore on both tubes – 3 large shank pipes

These slides can also be purchased as a separate accessory for the Conn 88H.

Conn 88H Family
The Conn 88H Trombone family consists of 3 series: 88H | 88O | 88HCL. Take a look at the other models:

Add to Wishlist

Quick View

Out of stock

Conn 88H Trombones – Closed Wrap

Retail: $4,860.00

$3,329.00
Financing Starting @ $75.73 per month
United Midwest Financing - Based on 60 months and 12.99% annual percentage rate

Select options

Add to Wishlist

Quick View

Conn 88HO Trombones – Open Wrap

Retail: $4,860.00 - $7,401.00

$3,329.00 – $5,069.00
Financing Starting @ $75.73 per month
United Midwest Financing - Based on 60 months and 12.99% annual percentage rate

Select options

Add to Wishlist

Quick View

Out of stock

Conn 88HCL Christian Lindberg Trombones

Retail: $6,612.00 - $10,146.00

$4,529.00 – $6,949.00
Financing Starting @ $103.03 per month
United Midwest Financing - Based on 60 months and 12.99% annual percentage rate

Select options

Click Here for more information on financing program details and to apply!